MaxStream XStream-Pkg Manuál Strana 20
- Strana / 62
- Tabulka s obsahem
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
XStream‐PKG‐T™TelephoneRFModem–ProductManualv5.x00[2006.02.24]
3. TelephoneModuleOperation
3.1. Telephone Module Configuration
The Telephone Module features a rich set of AT commands that allow flexibility in operations. On
power-up or reset, the Telephone Module operates in command mode and will accept AT
commands either from an RS-232 serial cable or from another MaxStream RF Modem (PKG-R,
PKG-U, etc.) over a wireless link.
Refer to the Telephone Module Configuration Example section [p
25] for programming examples.
Hardware Setup Option 1 – Serial Port Method:
Configurations made through the serial line [Figure 3-01]
©2006MaxStream,Inc.,ConfidentialandProprietary 20
1. Connect an RS-232 cable to the DB-9 connector of the PKG-T RF Modem.
2. Move DIP Switch 1 (Speaker Control) to the ON (up) position and DIP Switch 2
( control) to the OFF (down) position. This will configure the Data Path
Switch to connect the DB-9 and Telephone Module.
3. Assert (+10V). Most serial communications software (including MaxStream’s X-CTU
Software) will assert when the serial com port is opened.
Figure3‐01. HardwareSetup‐SerialPortMethod
Hardware Setup Option 2 – Wireless Link Method
Configurations made via a remote PKG RF Modem [Figure 3-02]
1. Detach cable from the DB-9 connector (Absence of the cable will automatically de-assert
(-10V RS-232 level)).
2. Connect wirelessly to the RF Modem (AT Commands are sent from a PC to a device such as
the PKG-R RS-232/485 RF Modem via a serial port. The PKG-R Modem then relays
commands over-the-air to the PKG-T Telephone RF Modem.)
Figure3‐02. HardwareSetup‐WirelessLinkMethod
www.agelectronica.com www.agelectronica.com
www.agelectronica.com www.agelectronica.com
- Product Manual v5.x00 1
- Contents 3
- 1.1. Key Features 4
- 1.2. Product Overview 5
- 1.3. External Interface 6
- 1.4. Block Diagram 7
- 1.5. Pin Signals 8
- 2. RFModuleOperation 9
- 2.1.2. Transmit Mode 10
- 2.1.3. Receive Mode 11
- 2.1.4. Sleep Mode 12
- 2.1.5. Command Mode 14
- 2.2. RF Module Configuration 15
- 2.2.2. AT Command Mode 16
- 2.2.3. Binary Command Mode 18
- 4. RFCommunicationModes 26
- 4.1. Addressing 27
- 4.2. Basic Communications 28
- 4.2.2. Repeater Mode 29
- 4.3.1. Acknowledged Mode 32
- 4.3.2. Multi-Streaming Mode 34
- FCC Certification 38
- OEM Labeling Requirements 39
- Antenna Usage 40
- FCC-Approved Antennas 41
- Mechanical Drawings 43
- RF Module Configuration 44
- 1-Year Warranty 61
- Ordering Information 61
- Contact MaxStream 62
Související produkty a manuály pro Sítě MaxStream XStream-Pkg
Sítě MaxStream XStream-PKG-R RS-485 Manuál
(45 stránky)
(45 stránky)
Sítě MaxStream 9XTend-PKG-E Instalační příručka
(13 stránky)
(13 stránky)
Sítě MaxStream 9XTend-PKG-E Manuál
(62 stránky)
(62 stránky)
Philips YS521/17 podręczniki
Instrukcje obsługi i podręczniki użytkownika dla Golarki męskie Philips YS521/17.
Dostarczamy 1 pdf podręczników Philips YS521/17 do pobrania za darmo według typów dokumentów: Arkusz Danych
Komentáře k této Příručce