MaxStream 9XTend-PKG-E Manuál stáhnout pdf (Strana 57)

9XTend‐PKG‐E™EthernetRFModem–ProductManualv2.x4x[2007.01.04]

©2007MaxStream,Inc.,Confidential&Proprietary‐AllRightsReserved 57

Limited Modular Approval

Power output is conducted at the antenna terminal and can be adjusted from 1 mill-watt to 1 Watt

at the OEM level. This is an RF modem approved for Limited Modular use operating as a mobile

transmitting device with respect to section 2.1091 and is limited to OEM installation for Mobile and

Fixed applications only. During final installation, end-users are prohibited from access to any pro-

gramming parameters. Professional installation adjustment is required for setting module power

and antenna gain to meet EIRP compliance for high gain antenna(s).

Final antenna installation and operating configurations of this transmitter including antenna gain

and cable loss must not exceed the EIRP of the configuration used for calculating MPE. Grantee

(MaxStream) must coordinate with OEM integrators to ensure the end-users and installers of prod-

ucts operating with the modem are provided with operating instructions to satisfy RF exposure

requirements.

The FCC grant is valid only when the device is sold to OEM integrators. Integrators are instructed

to ensure the end-user has no manual instructions to remove, adjust or install the device.

FCC-approved Antennas

WARNING: This device has been tested with Reverse Polarity SMA connectors with the

antennas listed in the tables of this section. When integrated into OEM products, fixed

antennas require installation preventing end-users from replacing them with non-

approved antennas. Antennas not listed in the tables must be tested to comply with FCC

Section 15.203 (unique antenna connectors) and Section 15.247 (emissions).

Fixed Base Station and Mobile Applications

MaxStream RF Modems are pre-FCC approved for use in fixed base station and mobile applica-

tions. When the antenna is mounted at least 20cm (8") from nearby persons, the application is

considered a mobile application.

Portable Applications and SAR Testing

When the antenna is mounted closer than 20cm to nearby persons, then the application is consid-

ered "portable" and requires an additional test be performed on the final product. This test is

called Specific Absorption Rate (SAR) testing and measures the emissions from the modem and

how they affect the person.

RF Exposure

This statement must be included as a CAUTION statement in OEM product manuals.

WARNING: This equipment is approved only for mobile and base station transmitting

devices. Antenna(s) used for this transmitter must be installed to provide a separation

distance of at least 30 cm from all persons and must not be co-located or operating in

conjunction with any other antenna or transmitter.

NOTE: The separation distance indicated in the above is 30 cm, but any distance greater than or

equal to 23 cm can be used (per MPE evaluation).

1 2 ... 52 53 54 55 56 57 58 59 60 61 62

Komentáře k této Příručce

Žádné komentáře

Skc limited EPAM-5000 Uživatelský manuál (90 strany)

Značka: Skc-limited | Kategorie: Equipment | Velikost: 3.42 MB |

Tabulka s obsahem

USER’S GUIDE

SKC EPAM-5000

User’s Guide

Safety Notice

Warranty

Table of Contents

Chapter 1

Introduction

NIOSH, 1973

Ease of use

General

Information

Relative Optical

Response

Features

Specifications

Components

Chapter 2

Chapter Overview

Power-On

Power-Off

Using the Menu

Setting the Date and Time

Setting the Alarm

Clearing the Memory

Chapter 3

Operating the SKC EPAM-5000

Selecting The Particle Size

1.0um Dust Particulates

2.5um Dust Particulates

Selecting PM

Auto-Zero

Manual-Zero

Sampling

Sampling, Continued

Location Codes

Reviewing Stored Data

Spreadsheet

Data plots

Installing DustComm

Windows ME

Windows NT

2000 & XP

Menu Selections

File Menu Commands

Exit software

Downloading Data

Downloading Data, Continued

DustComm Pro Window

Location Data

Translating

Generating a Plot

Data Plot Menu Selections

Editing Title

Applying a Correction Factor

Chapter 5 - Maintenance

Chapter 5

Maintenance

When to check

Conditions

Checking

Calibration

Checking the Flow Rate

Adjusting the Flow Rate

Battery Maintenance

Recharging the

Cleaning the Impactors

Cleaning the Sensor Optics

Continued on next page

Chapter 6 - Troubleshooting

Chapter 6

Troubleshooting

If instrument

Appendix

Appendix A

Menu Screens

Appendix B

Appendix C

Glossary of Terms

Appendix D

EPAM-5000 Accessories

Overview

Další produkty a příručky pro Zařízení Skc-limited

Modely	Typ Dokumentu
Chromic Acid Test Kit	Uživatelský manuál SKC Limited Chromic Acid Test Kit User Manual, 20 stránky

MaxStream 9XTend-PKG-E Manuál Strana 57

Komentáře k této Příručce

Skc-limited EPAM-5000 manuály

Skc limited EPAM-5000 Uživatelský manuál (90 strany)

Tabulka s obsahem

Další produkty a příručky pro Zařízení Skc-limited

MaxStream 9XTend-PKG-E Manuál Strana 57

Komentáře k této Příručce

Související produkty a manuály pro Sítě MaxStream 9XTend-PKG-E

Skc-limited EPAM-5000 manuály

Skc limited EPAM-5000 Uživatelský manuál (90 strany)

Tabulka s obsahem

Další produkty a příručky pro Zařízení Skc-limited